We're going to show you how to locate the image files that are contained within the Photos app on Mac OS. This is specific to Photos app, if you don't use the Photos app to manage pictures on your Mac then your photos will not be stored within the applications package library and instead you'd likely find them through Finder in the generic Pictures folder or elsewhere in Mac OS. Configure device operating systems, including Windows, Mac, Linux, Chrome OS, Android and iOS and administer client-based as well as cloud-based (SaaS) software Troubleshoot and problem solve core service and support challenges while applying best practices.
SC/UPC GPON SFP Transceiver (UF‑GP‑B+) |
Bracket Screws (Qty. 8) |
Cage Nuts (Qty. 4) |
Rubber Feet (Qty. 4) |
System Requirements
- Linux, Mac OS X, or Microsoft Windows 7/8/10
- Web Browser: Google Chrome (Other browsers may have limited functionality)
- Phillips screwdriver (for rack- or wall-mounting)
- Standard-sized, 19' wide rack with a minimum of 1U height available (for rack-mounting)
- Compatible PON SFP and SFP+ transceivers with appropriate fiber optic cabling and accessories. For information about compatible fiber transceivers, visit:
ubnt.link/UFiber-OLT-Modules
Designing your first GPON deployment requires specific knowledge and planning. For information on GPON network design and installation, including important considerations and best practices, refer to:
- ubnt.link/Designing-a-GPON-Network
For details on configuring UFiber devices for the first time to allow ONU LAN ports to provide connectivity, refer to: ubnt.link/UFiber-Initial-Configuration
System LED | |
---|---|
Blue/Flashing | Initializing/Booting Up |
White | Ready for Use |
PON LED (Ports 1 - 8) | |
Off | No Link |
White/Flashing | GPON Link/Activity |
SFP+ LED (Ports 1 - 2) | |
Off | No Link Zombafication mac os. |
Green/Flashing The jumping robot mac os. | 1G Link/Activity |
White/Flashing | 10G Link/Activity |
MGMT LED | |
Off | No Link |
Amber/Flashing | 10/100 Link/Activity |
Green/Flashing | 1000 Link/Activity |
GPON (Ports PON 1 - 8) | |
Gigabit Passive Optical Network ports support up to 128 clients on each port. | |
SFP+ (Ports 1 - 2) | |
Hot-swappable SFP+ ports support 1G or 10G connections. | |
MGMT Port | |
10/100/1000 Ethernet port used for out‑of‑band management. For firmware version 4.1 and newer, it is set to DHCP Client with the fallback IP address, 192.168.1.20/24.
| |
Console Port | |
RJ45 serial console port for Command Line Interface (CLI) management. Use an RJ45-to-DB9, serial console cable, also known as a rollover cable, to connect the Console port to your computer. (If your computer does not have a DB9 port, then you will also need a DB9 adapter.) Then configure the following settings as needed:
| |
Reset Button | |
There are two methods to reset the device to factory defaults:
| |
AC/DC PSU Module | |
One AC/DC 100W power supply is included. You also have the option to use a DC/DC PowerModule™, model RPS-DC-100W (sold separately). | |
PSU 2 Module Bay | |
For redundancy, you can add an AC/DC PowerModule, model RPS-AC-100W, or a DC/DC PowerModule (sold separately). |
OR
WARNING: Never look directly into the ends of fiber or modules. The emitted light could cause damage to the eye. |
WARNING: Until ready for use, keep modules and fiber patch cables covered using the included protective caps to ensure the connections stay clean. |
Note: One GPON SFP transceiver (model UF-GP-B+) is included. Use a compatible PON SFP transceiver with the appropriate fiber optic cabling for each PON port. For information on compatible fiber transceivers, visit: ubnt.link/UFiber-OLT-Modules |
The following instructions apply to firmware version 4.1 and newer.
Note: Previous firmware versions default to a static IP: 192.168.1.1. |
Wick: The Hot Foot Mac Os X
- Connect an Ethernet cable from the MGMT port on the device to a LAN segment that has an existing DHCP server.
- To check the IP address of the device, use one of the following methods:
- Set up the DHCP server to provide a specific IP address to the device based on its MAC address (on the label).
- Let the device obtain an IP address and then check the DHCP server to see which IP address was assigned.
- Launch your web browser. Enter the appropriate IP address in the address field. Press enter (PC) or return (Mac).
- Enter ubnt in the Username and Password fields. Click Login.
Customize settings as needed. For more information, refer to the UFiber resources, which are available at: http://ubnt.link/UFiber-Support
Wick: The Hot Foot Mac Os Catalina
The Ubiquiti® Network Management System (UNMS™) is a Linux-based controller software used to centrally manage the UFiber OLT and clients.
For the latest UNMS version or controller information, visit: www.unms.com
UF-OLT | |
Dimensions | 442.4 x 285.6 x 43.7 mm |
---|---|
Weight | |
Without Mount Brackets | 4.400 kg (9.70 lb) |
With Mount Brackets | 4.495 kg (9.91 lb) |
Max. Power Consumption | 40W (Excluding SFP Transceivers) |
Power Method | 110 - 240VAC Modular PSU |
Power Supply | (1) Hot-Swappable AC/DC 100W PSU (Included) |
Supported Voltage Range | AC Input: 100 to 240VAC |
Button | Reset |
Processor | MIPS 1004Kc 880 MHz Dual-Core |
Cloudship demo mac os. System Memory | 512 MB DDR3, 512 MB NAND |
LEDs | |
System | Status |
PON Data Ports | Link/Activity |
SFP+ Data Ports | Link/Activity |
RJ45 (MGMT) Port | Link/Activity |
Interfaces | |
Data Ports | (8) GPON Ports (2.488 Gbps TX/1.244 Gbps RX per Port) |
Serial Console Port | (1) RJ45 Ethernet Port |
Rackmount | Yes |
Operating Temperature | -10 to 45° C (14 to 113° F) |
Operating Humidity | 10 - 90% Noncondensing |
Certifications | CE, FCC, IC |
GPON SFP OLT Transceiver | Single Fiber, SM SC/UPC, 20 km, 1490 nm TX/1310 nm RX, ITU-T G984.2 Class B+ |